基于PSR-WSVM模型的边坡位移预测     

李建新  刘小生  肖钢  周文  刘仁志 《大地测量与地球动力学》2020,40(6):577-580

为建立高精度的边坡位移预测模型，采用相空间重构（PSR）将边坡位移时间序列数据转换为多维数据，同时构造小波核函数改进的支持向量机模型，建立PSR-WSVM模型并应用于边坡位移预测。将PSR-WSVM模型预测结果与传统支持向量机（SVM）模型、小波支持向量机（WSVM）模型和基于相空间重构的支持向量机（PSR-SVM）模型预测结果进行对比，通过平均绝对误差（MAE）、平均绝对误差百分比（MAPE）和均方根误差（RMSE）3个精度评价指标验证PSR-WSVM模型的可行性。工程实例结果表明，PSR-WSVM模型预测结果的3个精度评价指标都优于另外3种模型，边坡位移预测的精度明显提升。  相似文献   

Experimental Study of a Command Governor Adaptive Depth Controller for an Unmanned Underwater Vehicle     

《Applied Ocean Research》2019

Unmanned Underwater Vehicles (UUVs) are increasingly being used in advanced applications that require them to operate in tandem with human divers and around underwater infrastructure and other vehicles. These applications require precise control of the UUVs which is challenging due to the non-linear and time varying nature of the hydrodynamic forces, presence of external disturbances, uncertainties and unexpected changes that can occur within the UUV’s operating environment. Adaptive control has been identified as a promising solution to achieve desired control within such dynamic environments. Nevertheless, adaptive control in its basic form, such as Model Reference Adaptive Control (MRAC) has a trade-off between the adaptation rate and transient performance. Even though, higher adaptation rates produce better performance they can lead to instabilities and actuator fatigue due to high frequency oscillations in the control signal. Command Governor Adaptive Control (CGAC) is a possible solution to achieve better transient performance at low adaptation rates. In this study CGAC has been experimentally validated for depth control of a UUV, which is a unique challenge due to the unavailability of full state measurement and a greater thrust requirement. These in turn leads to additional noise from state estimation, time-delays from input noise filters, higher energy expenditure and susceptibility to saturation. Experimental results show that CGAC is more robust against noise and time-delays and has lower energy expenditure and thruster saturation. In addition, CGAC offers better tracking, disturbance rejection and tolerance to partial thruster failure compared to the MRAC.  相似文献   

Dynamic modelling of retrogressive landslides with emphasis on the role of clay sensitivity          下载免费PDF全文

Xue Zhang  Scott W. Sloan  Eugenio Oñate 《国际地质力学数值与分析法杂志》2018,42(15):1806-1822

This paper presents a detailed numerical study of the retrogressive failure of landslides in sensitive clays. The dynamic modelling of the landslides is carried out using a novel continuum approach, the particle finite element method, complemented with an elastoviscoplastic constitutive model. The multiwedge failure mode in the collapse is captured successfully, and the multiple retrogressive failures that have been widely observed in landslides in sensitive clays are reproduced with the failure mechanism, the kinematics, and the deposition being discussed in detail. Special attention has been paid to the role of the clay sensitivity on each retrogressive failure as well as on the final retrogression distance and the final run‐out distance via parametric studies. Moreover, the effects of the viscosity of sensitive clays on the failure are also investigated for different clay sensitivities.  相似文献   

基于概率积分法的采动坡体稳定性预测与分析          下载免费PDF全文

王猛  孙丽丽  薄怀志 《山东国土资源》2018,34(12)

地下采煤会引起地表沉降、变形,甚至引发山体、河堤滑坡等地质灾害。采动坡体的稳定性研究一直是采矿工程中实际关心的问题。该文首先介绍分析了概率积分法移动变形稳态、动态预测模型以及基于极限平衡理论的单滑面采动坡体稳定性预测模型,提出了使用概率积分法结合Knothe时间函数对采动坡体稳定性进行预测分析的方法,并使用C#及XML Schema语言编制了相关的计算程序。最后,结合一个工程实例对采动坡体稳定性和动态变化过程进行了预测与分析,通过实测数据验证了提出方法的可行性,得出了采动引起的坡体下沉是影响坡体稳定性的主要因素,并提出了在坡体拉伸阶段进行注浆加固的方法。  相似文献   

A multiscale work-analysis approach for geotechnical structures     

Hao Xiong  Zhen-Yu Yin  François Nicot 《国际地质力学数值与分析法杂志》2019,43(6):1230-1250

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.  相似文献   

基于2 m格网点云数据的高精度DEM制作第三次国土调查坡度图     

李国华 《测绘通报》2020,(8):117-121

地形地貌随着时间的推移时刻发生变化，以高精度数字高程模型（EDE）数据制作坡度图，进而计算田坎系数，更精准地进行耕地面积计算及统计。以2 m格网点云数据生成的DEM数据为基础，按照第三次全国国土调查的相关技术要求，根据耕地坡度分级要求进行分级，生成坡度分级栅格数据图。对坡度分级栅格数据图进行矢量化，生成坡度分级矢量化数据。对矢量化数据进行图斑综合、界线平滑、拓扑重建、数据裁切等处理，制作完成调查区域坡度图及相关属性数据制作。并对生产的坡度图成果进行分析，找出不同尺度格网生产的坡度图的技术差异，并对高精度坡度的应用进行了展望。  相似文献   

Application of micropolar plasticity to post failure analysis in geomechanics     

Majid T. Manzari 《国际地质力学数值与分析法杂志》2004,28(10):1011-1032

A micropolar elastoplastic model for soils is formulated and a series of finite element analyses are employed to demonstrate the use of a micropolar continuum in overcoming the numerical difficulties encountered in application of finite element method in standard Cauchy–Boltzmann continuum. Three examples of failure analysis involving a deep excavation, shallow foundation, and a retaining wall are presented. In all these cases, it is observed that the length scale introduced in the polar continuum regularizes the incremental boundary value problem and allows the numerical simulation to be continued until a clear collapse mechanism is achieved. The issue of grain size effect is also discussed. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

浅谈项目投资失败的原因及对策     

梁宗念 《南方国土资源》2002,15(2):69-72

地勘单位在向企业化经营转变的过程中 ,投资兴办了许多企业 ,但不少项目以失败告终。文章分析探讨了失败的原因 ,并提出相应的对策  相似文献   

Relict mountain slope deposits of northern Portugal: facies,sedimentogenesis and environmental implications     

Jean‐Pierre Texier  Jos Meireles 《第四纪科学杂志》2003,18(2):133-150

This paper deals with the formation processes and the palaeoenvironmental significance of relict slope deposits located on the uppermost part of the north Portugal mountains. For this purpose, seven key sites representative of the different lithofacies have been selected and analysed in detail. The data show that three main dynamic processes are responsible for the emplacement of regional fossil slope deposits: runoff, debris flows and dry grain flows. The ubiquity of these processes and the lack of frost‐related features or landforms do not support the existence of severe Pleistocene climates in this part of the lberian Peninsula as postulated by previous work. Pedological data gathered at one of the study sites show that a subalpine environment was probably present at 700–800 m altitude between 29 and 14 kyr. Using data from the Pyrenees Mountains, a 6.5 to 12°C depression in mean annual temperature has been tentatively postulated for this Pleniglacial period. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

格网DEM中基于坡度信息的粗差检测与剔除方法试验     

韩玲 《地球科学与环境学报》2003,25(1):74-75

提出了一种基于格网DEM的粗差检测及剔除方法,其基本思想是对每个表面上的点,在坡度上,高程或突变量引起的形状不连续,可能被怀疑有误差,通过坡度上每个点,应用坡度逼近或改变量来计算,考虑坡度变化的相对值,并以这些相对值计算一个统计值为判断该点合法性的阈值,使计算结果更为可靠。  相似文献